One of VISATON's
best loudspeaker systems, the VOX 253MHT
employs the excellent MHT 12
ribbon tweeter with 2 x AL 130
midrange and one sidemounted TIW 250 XS
10 inch bass unit. Which creates a superbly well balanced and enormously powerful loudspeaker system. Characteristics and sound properties
Due to the deep starting frequency of the MHT 12
it is possible to make use of this magnetostat in the VOX 253.
Fortunately, the AL 130's
only have to be separated slightly higher, which means we are still a long way from the baffle resonance levels. Here too, the transfer frequency is 3000 Hz. As can be seen from the dotted frequency curves for the individual drivers, the AL 130
drop off at 2000 Hz and the MHT 12
at 4500 Hz and meet again at 3000 Hz and -6 dB. The MHT12
need not by any means produce its full output at 3000 Hz, as some people often believe. This would not make sense in terms of achieving the lowest possible distortion factor.
Basic Kit includes:Specifications -
Loudspeaker drive units
High-quality crossovers, custom designed and built by VISATONonto high-grade PCBs
Recessed terminal trays with gold-plated binding posts
Oxygen free copper cable
Damping materials including cabinet lining and internal wadding
Gaskets or sealing strips for drive units
All fixing bolts and screws
Grille Cloth (Black is supplied as standard but other colours are available on request)
Grille fixing studs
Fully detailed assembly instructions, including CAD cabinet drawings
Cabinets and additional options shown separately
- MHT 12
Midrange - 2 x AL 130
Bass - TIW250 XS
Enclosure type - Bass reflex
Crossover frequency - 200Hz/3000Hz
Frequency response - 28Hz - 40000Hz
Sensitivity (2.83v/1m) - 84dB
Amp requirement - 50 - 350w
Impedance - 4 ohm
Net volume - 70L + 4L per speaker
Cabinet size (HxWxD) - 1150 x 235 x 400 (mm)
To compliment the loudspeaker kits, we offer an ever-expanding range of cabinets.
The VOX 753 cabinets are supplied in four different options as shown below, all are fully CNC machined and rebated from 18mm MDF.
Cabinets supplied as a self-assembly flat-pack in either plain mdf or pre-veneered mdf of your choice. Both options are fully machined and rebated which means that the components all slot together very easily, just needing to be glued with the PVA wood adhesive that is provided. All the necessary holes and rebates for the drive units are pre-machined so you can assemble the cabinets without having any wood-work skills.
Factory built option:
Cabinets are supplied fully assembled eliminating the need for you to undertake any construction. The plain mdf cabinets are supplied assembled but unfinished ready for you to apply your own paint finish and fit the drive units etc,.
The veneered cabinets are supplied assembled and lacquered to a furniture finish. We can fit all the drive units, crossovers etc, to these veneered cabinets at no extra charge so your loudspeakers are fully built and ready to plug and play.
Price per pair excluding VAT
Use the drop down box to chose your kit option. The options allow you to buy this loudspeaker kit with or without cabinets. Cabinets can be flat-packed or fully built up, in plain unfinished mdf or veneered mdf